The message USSD code in execution (or MMI code) appears when a code is dialed from the terminal from which a response is received from the network to carry out some operation such as checking or activating forwarding. They are usually codes that are preceded by symbols, such as * or #, which makes them different from a call.

What does MMI mean?

Please enable JavaScript

Maximum Medical Improvement (MMI) is one of the obstacles to resolving a case. A personal injury client can ensure that this does not take longer than necessary by keeping all of their appointments for medical care and rehabilitation.

Why does my cell phone say connection problem or incorrect MMI code?

The error may also be due to a failure of the SIM card that may be damaged. To confirm that this is not the source of the problem, it would be necessary to insert it into a different terminal and perform the test from another to rule out that the card is bad. .

What is the Tigo MMI code?

*#06# Check the IMEI of your device. *327# Give balance to other Tigo lines.

Why does my cell phone say connection problem or incorrect MMI code?

The error may also be due to a failure of the SIM card that may be damaged. To confirm that this is not the source of the problem, it would be necessary to insert it into a different terminal and perform the test from another to rule out that the card is bad. .

How can I find out my MMI code?

The most used MMI code is *#06# to know the IMEI of the mobile phone's motherboard, practically included by most manufacturers in their terminals.

What is the Movistar USSD code?

Movistar USSD code to consult: *#21#

Why am I not registered on the network?

If the message that says Not Registered on the Network appears on the phone screen, it could be that there is a problem with SIM Services, such as they have been blocked, for example. Forcing them to close will cause them to reboot and then it will be possible to log into the network normally.

What is the code to deactivate Call Forwarding?

With ##002# you cancel all call forwarding. And it works for both Android and iPhone, just carry out the following process: Open the phone app on your mobile. Type ##002# and press the call button.

What happens if I put *# 0 *# on my cell phone?

For example, the codes *#7353# or *#0*# allow you to enter menus where you can test the device's speaker, vibrator, camera, Bluetooth, accelerometer, light and proximity sensor, hall sensor or Hall IC (to control turning the screen on and off when using magnetic protective cases or covers…

How do you deactivate 31?

With ##002# you cancel all call forwarding. And it works for both Android and iPhone, just carry out the following process: Open the phone app on your mobile. Type ##002# and press the call button.

What is the clear USSD code?

How to get clear USSD code? USSD. From your cell phone, you just have to dial *611# and you can automatically find different options to manage your Claro services.

What does the number is invalid mean?

Answer. This error message is displayed when there is no phone number selected to make a call. To resolve this, select a support number from the dropdown menu and select a phone number.

What is the clear USSD code?

How to get clear USSD code? USSD. From your cell phone, you just have to dial *611# and you can automatically find different options to manage your Claro services.

What is the Entel MMI code?

However, when you type the combination *#06# the IMEI will appear on the screen, regardless of the model and brand you have.

Why does my cell phone say connection problem or incorrect MMI code?

The error may also be due to a failure of the SIM card that may be damaged. To confirm that this is not the source of the problem, it would be necessary to insert it into a different terminal and perform the test from another to rule out that the card is bad. .

What happens if I dial ##002 on my cell phone?

What is the code ##002# and what is it for? This code is used to deactivate absolutely all call forwarding on your mobile, whether you have activated them or not. It works for any mobile phone, and you don't need to configure or touch anything on your own, just write the code and that's it.

What happens if I dial *#61 on my cell phone?

With the code *61* you will forward the call if you do not answer the phone. Then dial the number to which you want the calls to be forwarded and press # You have already forwarded your calls from landline to mobile, you can hang up.

What happens if I dial *# 21?

*#21#: with a function very similar to the previous one, this code allows you to know if data, calls and messages are being diverted. But in addition, this code shows a screen that confirms if an improper diversion is occurring.

What is the Movistar numeral for data?

Dial *611# from your cell phone and there you will find a complete menu with the Movistar Prepaid packages that you want to buy. Here you can also buy them with your recharge balance (if you don't have balance you can recharge on the website or at your nearest store).

What does it mean that the SIM card has not been provisioned?

The SIM not provisioned message indicates that the SIM card has been deactivated by the network operator or service provider.

How do I know if the clear SIM card is registered in my name?

To verify whose name the number you use on your mobile phone is in, you have two options: going directly to a customer service office of the company that operates your line or calling the call centers. In fact, the most effective way To find out the ownership of a SIM, it is by calling the…

How do I know if my phone is diverted?

*#21# (numeral+asterisk+21+numeral) Thanks to this code you will be able to discover if you have call forwarding, text messages and other data enabled. On the screen you will see the status of all types of diversions and the phone number to which the data is redirected.

What happens if I put 31 on my cell phone?

* If you press #31# and the call button, you permanently disable call hiding. * If you press #31# followed by the number, you activate call hiding for only one call.

How do you know if call forwarding is activated?

Go to “Settings” and then click on the “Phone” option. Within the menu, look for the “Call Forwarding” option. Activate or deactivate the detours according to what you need. The icon appears in the bar when call forwarding is activated.

What does code *# 9900 do?

Did you know that it is possible to free up space on your Samsung smartphone in a few seconds and without downloading apps? You just have to go to the calling application, enter the code *#9900# and choose the 'Deletedumpstate/logcat' option. This way you can delete junk files from your phone quickly and easily.